WET SOUNDS OFFICIAL PARTNER STORE | AEGIX

WETSOUNDS TRADE & RETAIL ACCOUNTS - SIGNUP NOW

WET SOUNDS: More Than Just Audio, It’s a Lifestyle

WET SOUND OFFICIAL PARTNER STORE MARINE AUDIO POWERSPORT & GOLF CARTS OUTDOOR MOTORCYCLES LIFESTYLE ACCESSORIES
WET SOUNDS  |  SKU: REV 10 B-SC V2

REV10™ Black V2 | Wet Sounds Revolution Series 10" Black Tower Speakers

£1,100.99 £1,454.89
Shipping calculated at checkout.

Choose Mounting Clamps:

Care information

What Is Not Covered
This warranty does not cover fading or discoloration caused by exposure to sunlight or chemicals such as ammonia, household bleach, or any cleaning material that contains abrasive substances. (For information on how to prevent fading or discoloration, consult for recommendations on cleaning products) Wet Sounds, Inc. does not cover the cost for removal and reinstallation of any kind. Additionally, shipping TO Wet Sounds, Inc. is covered by the purchaser This warranty is void and inapplicable if Wet Sounds deems that the product was abused or misused; including but not limited to Speaker product that has been improperly-powered (under or over powered), causing thermal (burnt voice coil) and/or mechanical failure (torn surrounds or spiders), damage caused by accident, mishandling, improper installation, negligence, normal wear and tear, excessive water or heat damage, freight damage or products that have been altered in any way. Product owned by anyone other than the original purchaser from an authorized Wet Sounds dealer. (The warranty is not transferable and will not apply to products purchased from unauthorized dealers.) Wet Sounds is not responsible for any damages to a consumer's boat or person from a product failure. The warranty is void if Wet Sounds deems the product was installed or used improperly. Wet Sounds shall not be responsible for any incidental or consequential damages, except to the extent provided (or prohibited) by applicable law. This warranty gives you specific legal rights, and you may also have other rights which vary from state.

What Wet Sounds, Inc. Will DoWet Sounds, Inc will repair any part of your product that proves to be defective in materials or workmanship. In the event repair is not possible, Wet Sounds, Inc will replace the product in question. If it is deemed necessary Wet Sounds, Inc. will either replace the entire product with a refurbished unit or it will be replaced with a model that is similar in price if that model is no longer available. Labor cost and materials needed to complete this service will be at no charge to the purchaser. Additionally, the cost of shipping TO the consumer is also covered under this warranty.

How to Obtain Warranty ServiceContact Wet Sounds, Inc. either by phone at 877-938-7757 or by email at WARRANTY@WETSOUNDS.COM. A service representative will assist you in the necessary actions to verify that the problem that you are experiencing is covered under warranty. If it is in fact a warranty issue, Wet Sounds will issue an RA number for tracking purposes and give instructions on sending the product in for evaluation. Wet Sounds, Inc. How State Law Applies This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Internet WarningWet Sounds, Inc. products sold on any non authorized web site or internet auction site are void of any and all manufacturer's warranty. Please contact Wet Sounds at 877-938-7757 or visit our web site at WWW.WETSOUNDS.COM to search for an authorized site and/or an authorized retailer near you.

Delivery and Shipping

Add some general information about your delivery and shipping policies.

Description

Upgrade your boating experience with the WETSOUNDS WAKE SPEAKERS REV 10W-X V2 BLACK - PAIR | WETREV10B-SXMV2. These high-quality speakers deliver crystal clear sound, perfect for a day out on the water. With a sleek black design and advanced technology, these speakers are a must-have for any boat enthusiast.

Features

Revolution Series is the pinnacle of wakeboard tower speaker design offering the most advanced speaker design anywhere in the world. Available colors are Gloss White or Gloss Black with UV inhibitors REV TEC design features enhanced mid bass response at all volume levels with smooth frequency response for amazing near field and wake range sound quality.

  • All Stainless Steel Hardware
  • Stainless Steel grilles
  • Reinforced Composite Enclosure

Available Mount Options are: X mount for Cast Towers, TC3-FC Fixed Mount universal Stainless Steel Clamp with integrated wiring in the clamp body and. Patent Pending TC3-SC swivel clamp featuring full swivel capability, True Disconnect single bolt quick disconnect feature, integrated wiring connection in the center of the clamp with 6 pin connector option for speaker power and LED lighting.

Rev Series Tower Speakers are available in a 8" and 10" Model in Gloss Black or Gloss White Finishes and sold in pairs with clamp choice.

Clamp Styles Available:

  • Swivel Clamp - Fits Tube Diameter 1 7/8" up to 3"
  • Mini Swivel Clamp - Fits Tube Diameter 1" up to 1 7/8"
  • Swivel Surface Clamp (SXM) - For Surface Mounting, Allows Swivel and Removability of Speaker
  • Fixed Clamp - Fits Tube Diameter 1 7/8" up to 3"
  • Mini Fixed Clamp - Fits Tube Diameter 1" up to 1 7/8"
  • Fixed Clamp SA (Silver Aluminum) - Fits Tube Diameter 1 7/8" up to 3"
  • X-Mount (Surface Mount) - For Surface Mounting, Available in Black or White Powdercoat Finish

Technologies

  • REV TEC™ Technology   
  • Wet Sounds™ EFG™: Epoxy Fiber Glass Speaker Cone
  • Reinforced Composite Enclosure.
  • Wet Sounds™
  • Extensive Crossover Network
  • TC3-S Stainless Steel Patent Pending Swivel-Quick
  • Disconnect Clamp           
  • Stainless Steel Hardware.
  • TC3 FC Stainless Steel
  • Fixed Clamp
  • HLCD: Horn Loaded Compression Driver

Specifications

  • Impedance:        4 ohms
  • RMS Watts:        300
  • PEAK Watts:       600
  • Frequency Response:    20Hz to 20KHZ
  • Sensitivity:          92 db at 1watt/1 meter
  • Mid Bass:             10 inch Kevlar reinforced EFG™ cone woofers with polyurethane surround.
  • High Frequency: Pro-Axial™ Driver - Coaxially mounted Titanium Diaphragm High Output             
  • Size & Weight                    
  • Front-Back:         13" (330.20mm)               
  • Hang Height       11 9/16" (293.68mm)     
  • Width:  10 5/8" (269.87mm)       
  • Hang Weight:     14.8 pounds / 6.71 kg each          
  • Note:    All specifications are for each REV10 enclosure

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

WET SOUNDS

REV10™ Black V2 | Wet Sounds Revolution Series 10" Black Tower Speakers

From £810.02 £1,218.96

Upgrade your boating experience with the WETSOUNDS WAKE SPEAKERS REV 10W-X V2 BLACK - PAIR | WETREV10B-SXMV2. These high-quality speakers deliver crystal clear sound, perfect for a day out on the water. With a sleek black design and advanced technology, these speakers are a must-have for any boat enthusiast.

Features

Revolution Series is the pinnacle of wakeboard tower speaker design offering the most advanced speaker design anywhere in the world. Available colors are Gloss White or Gloss Black with UV inhibitors REV TEC design features enhanced mid bass response at all volume levels with smooth frequency response for amazing near field and wake range sound quality.

Available Mount Options are: X mount for Cast Towers, TC3-FC Fixed Mount universal Stainless Steel Clamp with integrated wiring in the clamp body and. Patent Pending TC3-SC swivel clamp featuring full swivel capability, True Disconnect single bolt quick disconnect feature, integrated wiring connection in the center of the clamp with 6 pin connector option for speaker power and LED lighting.

Rev Series Tower Speakers are available in a 8" and 10" Model in Gloss Black or Gloss White Finishes and sold in pairs with clamp choice.

Clamp Styles Available:

Technologies

Specifications

Choose Mounting Clamps:

  • Swivel Clamp ( 1 7/8" - 3" )
  • Swivel Clamp Mini ( 1" - 1 7/8" )
  • Swivel Clamp Base Mount
  • Fixed Clamp ( 1 7/8" - 3" )
  • Fixed Clamp Mini ( 1" - 1 7/8" )
  • Silver Aluminum Fixed Clamp ( 1 7/8" - 3" )
  • X-Mount ( Mounting to Surface )
View product